WIFI TRACKER PREPARATION WITH COMPONENTS

What is wifi tracking?

WIFI tracking device is a type of device used to collect radio waves necessary for WIFI to work from long ranges about 2 to 50 meters range from the place it is located and placed.

Materials necessary to create a Wi-Fi tracking device:

• a metal caps of 90 mm diameter- 20 pieces , 
• stud of 8 mm diameter 
• few nuts of 8 mm size and
•  a satellite cable.

First of all take the caps and mark the center using scale and marker.

After locating the center drill the center up to 8 mm diameter using drill bits and drilling machine.

change 90mm diameter metals caps to a diameter of 

• 4 pieces of 37 mm diameter
• 1 piece of 38 mm diameter
• 1 piece of 54 mm diameter
• 1 piece of 68 mm diameter
• 1 piece of 90 mm diameter

using pair of metal cutters

After cutting the metal caps into required sizes now you have to take 8 mm diameter stud and a few hexagonal bolts of internal diameter 8 mm in size. 

Now slowly attach the bolts to stud and caps in them after one bolts place one metal cap and one bolt like that add all  bolts and metal caps of diameter 37 mm to the front with an distance of 28  mm in between each cap.

After successfully inserting all the four cap in the front now come from back with a bolt and meta cap of 38 mm in size  with an gap of  28 mm in between, now add a bolt and metal cap of dimeter 54 mm at a distance of 32 mm from 38mm metal cap and a bolt next to it after it add a metal cap of 68 m at a gap of 12 mm and place bolts if the thickness of bolt is less than or equal to 12 mm in size or place washer in between them next o it place 90 mm diameter metal cap with a gap of 11 mm in between them and place a hexagonal bolt  next to it  with a washer rigidly.

now cut the remaining excess stud or add a few more metal caps to the front with the specified dimensions. after it place a hole with aa help of drill bit of 1 mm to the last metal cap i.e. 90 mm at a distance of 24mm from the stud or 21mm from the top carefully without damaging the metal cap of  68 mm.

This metal cutting and assembly is sufficient for the device to work and take the satellite cable and remove the connecting device of it and cut the outer shell of satellite cable to allow the wire to connect to 68 mm diameter metal cap. So that the signal from the radio waves and at large distance captured by the receiver will transmit that signal through the wire in the form of Wireless Fidelity(WI-FI) to work which has to be connect to WI-FI receiver of the home and we can connect to devices over a range of 10 kilometer from the place we are.